グローバルナビゲーションへ

本文へ

ローカルナビゲーションへ

フッターへ



ホーム  > こんなときには  > Foreign language  > What should you do when...  > Procedure for resetting the gas meter

Procedure for resetting the gas meter

The gas meter has safety function. It automatically stops the gas if earthquake or gas is detected.

If the gas is stopped and the red lamp of the gas meter is blinking, reset the gas meter following the procedure shown below.


[CAUTION]

If the gas smells, do not carry out the reset operation shown below, but contact Chubu Gas Co., Ltd. immediately.

If the gas smells

Reset procedure

Stop all gas equipment.
* Do not close the gas cock (meter cock) of gas meter.

Loosen the cap of reset button by rotating it in anticlockwise direction and remove it.

Push the reset button to the end securely and release the finger soon.
* Do not press the button continuously or do not push it many times.

Put the cap of reset button back to the original position and wait for approximately three minutes. During this time, whether the gas leaks is checked.
* While the red lamp blinks, do not use the gas.

If there is no defect, the blinking red lamp goes out and the gas can be used.

* If the red lamp blinks for three minutes or more, check the gas cock is surely closed and carry out the reset again.
* If the gas meter is not reset normally, contact Chubu Gas Co., Ltd. Ask someone who can understand Japanese to call on the phone.
Contact your nearest Chubu Gas Co., Ltd.
▼ Customer who lives in Aichi▼Customer who lives in Shizuoka
Toyohashi branch 0532-32-5511
Toyokawa business office 0533-85-7025
Hamamatsu branch 053-465-1234

Security system for 24 hours a day, 365 days a year
At Chubu Gas Co., Ltd., staff and emergency vehicle stand by all the time for gas emergency situation such as gas leakage and gas accident.